Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-13-2015, 10:36 PM
ZackN920's Avatar
ZackN920 ZackN920 is offline
VideoKarma Member
 
Join Date: Jul 2014
Location: Stephenson County, IL
Posts: 242
Well, who's got an extra yoke they want to sell....

Thanks for "spelling out" that test procedure for me Zenith26kc20. I appreciate that.

Well I wired in the resistors on the diodes and also disconnect that vert. out. transformer, and hooked it to the variac. I powered the set up, slowly turned the brightness up till I could see a line, then flipped on the variac. Well, when I started applying voltage I noticed the wierd line on the right popped on the screen and(I didn't know how high I should go) I eventually went up to 90 volts with it only growing to about the same size it always has. I didn't want to burn the trans up so I stopped at that 90 and just shut down.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:32 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.