Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-13-2015, 10:23 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
You can use an old line cord to plug into the variac. I put alligator clips on the wire ends. If you remove the B+ from the vertical transformer (usually the red wire coming from the power supply) and connect the variac from the transformer wire going to the tube socket (plate of the tube) with the set powered up, go from zero volts on the variac up slowly. You should get deflection as you increase the voltage from the variac. If the keystone still exists, the yoke is probably bad. This set has a "hot" chassis, be very careful with the variac connections. Do not let them contact the chassis. It looks like it has a power transformer but the transformer is filament only. The B+ comes from a voltage doubler.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.