![]() |
|
|
|
#1
|
|||
|
|||
|
Maybe double check the voltage rating on the cap and what the circuit calls for just to be sure. I always get the 10,000hr 105 deg c caps and have never had one fail.
Gregb |
|
#2
|
|||
|
|||
|
Hey that's pretty good sleuthing, dude.
Besides verifying the voltage rating of that cap, check the value of the two 270K equalizing resistors. If one is off by much, it would throw excessive voltage onto one of the caps, since the caps are in series.
|
|
#3
|
||||
|
||||
|
Quote:
That makes sense, thanks! |
|
#4
|
||||
|
||||
|
both of those resistors were bad... one did not read at all, and the other was at 750K! That accounts for the excessive voltage and the bad cap. Thanks for that good advise, I would have never known and just thought it was a faulty cap!
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|