![]() |
|
|
|
#1
|
||||
|
||||
|
I would go back to the origional 6AG5 The 6W4 sub is probably
OK. Almost always better to stick with origional #'s. The burned part is probably a disc cap across a high ohm resistor. I dont think MOV's were around til the 70's. Symptoms sound like a wide open electrolytic in the power supply. After the burned part I would change them & see if the set works somewhat. Its BEST to have it going so when you recap you can check your work after every few caps. 73 Zeno
|
|
#2
|
||||
|
||||
|
Quote:
__________________
Make sense? What fun is there in making sense? -Discord |
|
#3
|
||||
|
||||
|
Just looked up the SAMS on the Early Television Org. Website. It's available for download as a PDF. Nice. simple power supply, and good, straightforward circuits, unlike that accursed Emerson I'm now fighting with (model 698-B, with a partially "upside-down" power supply. You will have a much easier time with that nice Majestic!
![]() Kevin |
|
#4
|
||||
|
||||
|
Quote:
Yea. Looking at the underside of the chassis it looks easy. Analog tv's are simple from what I've seen. Nice and easy is good. But I would love to have this working to watch tv with if I can get a digital converter to work or use a 75ohm coax to 300ohm adaptor. I searched that up and I wonder if it will work.
__________________
Make sense? What fun is there in making sense? -Discord |
![]() |
| Thread Tools | |
| Display Modes | |
|
|