![]() |
|
|
|
#1
|
||||
|
||||
|
Oh yes, one more question.
I took the radar tube out of its box and examined it. I was told that it had an outer Aquadag coating, forming the filter cap usual on later TV CRTs. I notice no such coating. The front 2/3 of the bell insides is aluminum coated, the back 1/3 and a couple of inches back into the neck is Aquadag coated on the inside ... but no Aquadag on the outside. I even tried scratching a bit off at the edge with my fingernail, nothing came off. If you've used one of these, was it outside coated? |
![]() |
| Thread Tools | |
| Display Modes | |
|
|