![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
I've heard mentioned in here several times about an "ion trap" which can get moved and cause trouble with the picture tube, my question is, what the heck is the "ion trap" and where is it at in the TV, and how does one go about readjusting the "ion trap"? Another question that's slightly off topic but not really, and has to do with the tuner on this TV and others like it I've seen from the same time period, and that is, why is it that a lowly portable tabletop TV set like mine and or like the old Philco Predictas have built-in UHF Tuners in them but yet every single full-sized "high end" console I've seen from the same time period only had a VHF Only tuner in them with no built-in UHF Tuner in them? Was there something about the portable/tabletop units that made them easier to install built-in UHF Tuners in them than the giant Consoles? Or was it something else? I just think its weird that a considerably lower-end TV would have Higher-end features than a Higher-end TV of the day would have. |
|
#2
|
||||
|
||||
|
The sets probably were sold in a UHF area or maybe
were latter converted with kits. Some places like Hartford Conn. were most UHF. Between NYC, Providence & Boston there was only #3 & #8 left. All the newer stations had to go on UHF. So sets sold there usually had UHF tuners. In 1964 all sets built to be sold in the US had to get UHF. An interesting early UHF promo for Zenith UHF here. https://www.youtube.com/watch?v=7lu5jqXaHRE I will leave the ion trap to others. I know but its not my era so I may get something wrong ! 73 Zeno
|
|
#3
|
|||
|
|||
|
Quote:
BTW, if the ion trap was never moved, don't move it for now, until you establish reliable high voltage. If it has to be removed for disassembly, mark the trap and the CRT neck with a Sharpie marker so it can be replaced in the exact same position. Once the set is working well, you can try to adjust it for maximum brightness, but it might not be needed. Just a bit CW or CCW. |
|
#4
|
|||
|
|||
|
Quote:
What do you suggest as far as Capacitors to use in this TV set? I'm wondering because I know these sets used sometimes 1kV capacitors in them and 1kV caps aren't readily available anymore not even on most of your antique electronics restoration websites and even if they are they're quite spendy. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|