Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 07-01-2015, 12:01 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
It was not uncommon to mount radio chassis on springs or rubber washers to reduce microphonics.

My Zenith 12-S-471 radio had spring mounts on the chassis; tapping certain tubes would give you a brief chime, but it never grew into a squeal. My Stewart Warner 1865 radio is mounted on rubber washers. My Philco 42-1240 TV is mounted on rubber "feet," presumably for the same reason. The Philco feet were used on various TV chassis, commonly enough that someone now makes repros.



If microphonics are a serious problem with your TRK-12 radio, you could try adding damper rings. You'll find lots of info about them in an Internet search, and not all of the info is snake oil. The lead damper on my T-100 tube was there for a reason.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html

Last edited by Phil Nelson; 07-01-2015 at 12:31 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.