|
|
|
|
|
#1
06-30-2015, 01:41 PM
|
||||
|
||||
|
So I still only have 4000v at the second anode and can't find any obvious signs of why. Voltages at the horizontal output, damper and picture tube all test pretty close to the values listed in the schemstic.
|
|
#2
07-07-2015, 02:34 PM
|
||||
|
||||
|
Finally made the molding that was missing around the side louveres. Still working on the flyback issue.
|
|
#3
07-28-2015, 01:58 PM
|
||||
|
||||
|
Decided to take off the remaining flaking aquadag and spray on a new coat.
|
|
#4
07-28-2015, 03:50 PM
|
||||
|
||||
|
Picture tube is now recoated!
|
|
#5
07-28-2015, 03:53 PM
|
||||
|
||||
|
I found the little sliding focus range switch, which allowed me to make the picture sharper and much easier to view, but still only at 3000-4000 volts to the second anode. Still trying to figure out what's pulling that down....
|
| Audiokarma |
|
#6
08-02-2015, 02:52 PM
|
||||
|
||||
|
Flyback help!!
I'm wondering if I should try my zenith flyback replacement. This one cleaned up pretty good, but still wonder if it's weak? Do flybacks become weak or is it a situation where they either work at or not?
|
|
#7
09-08-2015, 08:30 AM
|
||||
|
||||
Looking at the picture of the flyback, it looks to me as if there is a burned spot on the hv donut. My guess is a short.
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..." Please join my forum. http://www.tuberadioforum.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
