![]() |
|
|
|
#1
|
||||
|
||||
|
A good move when re-installing a CRT base is to solder 2-4" of thinner (1/3 the original's diameter is good) wire to the original leads to aid the threading process and minimize the bending the original leads need to line up.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|