![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
Was wondering if a green phosper tube's cathode and other guts could be a doner to rebuild a white phosper tube? Or would the cathode being briefly exposed to air ruin it? IIRC, cathodes have to be cooked when first in a vacuum, and you might not be able to do that again.
__________________
|
|
#2
|
||||
|
||||
|
I'm still a 'dumb guy' when it comes to all the hands-on details on this stuff, but as far as I can see there'd be no reason a green tube couldn't be re-phosphored as a white tube. Hadn't thought of that before. Everybody save those dud 3KP1 'scope tubes!
|
|
#3
|
||||
|
||||
|
Unfortunately, once you let the green phosphor tube down to air to replace the phosphor, the cathode coating is destroyed by contact with the air so the cathode (or entire gun) will need to be replaced, as well...
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|