Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 04-29-2015, 01:57 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
When I reconnect the old quadrature transformer (still in place and connected to everything else), the 3.58-mc waveform is visible and I hear a tone WHEN there is no signal to the receiver.



When I turn on the color bar generator to inject a signal at the 1st video amp, the waveform is flatlined.



I guess the oscillator is capable of running, but something else is killing (or swamping out?) the oscillation when a video signal is present.

For what it's worth, I reviewed my notes of voltage readings in the color circuits. I found wrong voltages on the grids (pins 2 and 7) of V125, the 12BH7, R-Y/G-Y demodulator tube, measuring near zero when those grids should have around -20V (or around -15V according to Sams). At the time I attributed this to the oscillator not running, since the outputs of T115 connect to those grids, but who knows?

Another anomaly at V121B, the 6AZ8 bandpass amp, where the grid should have about -12V and I measured only about -3V or less.

I haven't forgotten the toasted appearance of the old transformer.

Phil Nelson

Last edited by Phil Nelson; 04-29-2015 at 02:50 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:59 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.