Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 04-22-2015, 05:06 PM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 548
Quote:
Originally Posted by bhegges View Post
I am looking at building an all tube television and have some questions about the high voltage supply. In looking at some of the early designs a 1b3 diode was used in conjunction with a beam pentode oscillator. My understanding is that the beam pentode would feed a high frequency into the primary transformer winding and thus creating the high voltage secondary to feed the 1b3. I am thinking of using an oscilloscope tube and will probably need 2-6kv depending on the tube.
I don't know your background but designing a TV from scratch is a big project. Oscilloscope tubes generally don't need much more than 2 KV anode voltage even with post deflection acceleration. It might be better deciding on the CRT tube first (what you can find), then designing from there.
Too high an anode voltage could cause problems such as focusing.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.