Quote:
Originally Posted by Marco-nix
The white wire is in place to terminal F0 ... What I want to know if I weld the yellow wire to the terminal F1 or F2 or F3, What kind of image I will have and what is the danger being given the different voltages.
|
Be sure you are moving the right wire.
On my manual the wire to move goes to R711 560 K ohm.
The other end of R711 goes to CRT pin 6 & SG705
No danger if you move the right wire.
The pix may change focus better or worse. Often there is
little or no change moving the jumper.
73 Zeno
04-19-2015, 08:57 PM
Hybrid Mode
