Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 04-15-2015, 08:33 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by tvcollector View Post
I'm getting -72 DC volts at pin 7.. Sams calls for -120.. Someone must have replaced or removed the Horz osc, one or two of the solder pads have been burnt off and jumpered from the horz osc.. Sams and the printed boards are incorrect from each other...
The osc. signal is definitely not properly reaching the HO grid. Test and or replace all suspect parts in the osc, and all parts from it leading to the grid of the HO Tube.

A near 50% positive increase in the HO grid voltage is the main cause of the problem. The HO tube is going to conduct way too much current until it's grid drive signal is made right....I recommend removing the top lead and disconnecting the screen grid (not the control grid) lead from the socket of the H output tube. until you can get the grid voltage back in the ballpark.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:25 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.