![]() |
|
|
|
#1
|
||||
|
||||
|
Here is a comparison. First photo is from Ed Reitan's CBS field sequential television. Correction: Photography from the screen of John Folsom's 1950 CBS Labs RX-43 CBS Color Receiver as seen on Ed Reitan's website.
![]() Second photo is from a 70 inch 2012 Sharp Quatron LCD.
__________________
Last edited by etype2; 04-09-2015 at 11:37 AM. |
|
#2
|
||||
|
||||
|
Quote:
If you took that flatscreen screen shot, and ED did not take his from the same broadcast, then you are likely comparing apples to oranges, rather than apples to apples.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 Last edited by Electronic M; 04-09-2015 at 01:05 PM. |
|
#3
|
||||
|
||||
|
Quote:
The author of this thread said this in part "I have always sort of liked having a working "roundie" color set around for decades now, but i'm not sure why really. I personally think that they can make as decent a picture as most anything else I have seen, but I also think that the flat screens everyone has gone nuts over don't look that great really. Or not great enough for me to spend the money that they at least once commanded at retail." I disagree that flat panels don't look great, that is why I posted the roundie screenshot and my screenshot. I would love to see comparison screenshots of the same exact frame from owners of the CT-100 or any other roundie posted here. My screenshot is from a Direct TV satellite transmission. I suspect other screenshots will look better or worse then my shot, depending on the source. BTW, I like roundies, too. :-)
__________________
|
|
#4
|
|||
|
|||
|
I don't go around check flat screens often, but IIRC there was something about fast movement that did not look right to me. Maybe that is not the case anymore, but like I said I cant remember the last time I looked at one long enough to know if it was still the same.
|
|
#5
|
||||
|
||||
|
Quote:
I'm thinking about image quality, ie, color rendition and resolution as compared to the old roundies. Don't get me wrong, I have already said that I'm a fan of roundies. I have two so far and looking for a few more.
__________________
|
| Audiokarma |
|
#6
|
||||
|
||||
|
The best comparison is the one I did between an original on my computer
screen (i.e. no TV in between) and my CT-100: http://www.videokarma.org/showthread...=262176&page=6 This is not a screen shot of the computer. Its the original. The camera image of the CT-100 was tweeked in Photoshop with the computer monitor sitting om the CT-100 until the images on the CT-100 and the computer were identical except for brightness. This is a test of TV resolution, color, and contrast. What you see on YOUR computer is an accurate report on the DIFFERENCE between the original as seen on the computer and the image on the TV. |
|
#7
|
||||
|
||||
|
Quote:
As to the screen shot I posted, if anyone has the DVD of the Wizard of Oz, the frame is at the 43 minute mark, just before Dorothy meets the scarecrow. You could take a screenshot on your roundie and post it here for comparison purposes.
__________________
|
|
#8
|
||||
|
||||
|
Quote:
The clearer photos are photos made with a Canon 7D camera. They have not been through video. The comparison is beween the original and images of the CT100. As I said, the CT100s are adjusted so that when I am looking at the photos of the CT100 on the same Dell monitor, the images on the monitor look exactly like the CT100. Thus, the comparison on YOUR computer is also exactly the same difference between the original and the CT100. I post images of the same Dorothy scene. These are made with the same camera. This is a dvd, not a Blu-ray. It is output as NTSC and modulated on a B-T agile modulator. Both sets look at NTSC true VSB, cut off at 4.2 MHz an -1.25 MHz. The sharp one is my Sony Bravia 45 inch LCD and the other two are the CT100. The camera and processing was set for no sharpening, no noise reduction, no contrast enhancement, and 5250K. The camera was defocused to smear out the dot structure. They were 1/6 second exposures, the f-number was set to compensate for brightness difference. One CT100 image was changed in one way: the color temp slider in Photoshop was moved to 4850K. This makes it look bluer. This is probably a better representation of a by eye comparison; apparently the camera, set for non-auto color temp, is being fooled by phosphor differences. http://www.videokarma.org/attachment...1&d=1428624485 http://www.videokarma.org/attachment...1&d=1428624485 http://www.videokarma.org/attachment...1&d=1428624485 |
|
#9
|
|||
|
|||
|
http://www.google.com/url?sa=t&rct=j...90491159,d.b2w
I have some pretty good shots from the oz on this video |
|
#10
|
||||
|
||||
|
Quote:
Comments: Image on left looks too blue, looks like 9500 to 11000 K. I see image processing going on in the background. Image in the center looks the most satisfying, well saturated, but slightly warm. Image on the right looks like you added a blue filter. Why did you not set the camera to auto exposure and why did you defocus? I think you would have a truer representation of the images. Yes, the pixel structure would be noticeable on the CRT. Don't we want to see the brightness differences? May I ask the age of the Sony and was it calibrated to Rec.709? Was your CT-100 calibrated? Thank you for posting the images, very nice set and images.
__________________
Last edited by etype2; 04-10-2015 at 03:21 AM. |
| Audiokarma |
|
#11
|
||||
|
||||
|
Quote:
I wish I had time to re-read everything, but I don't. ![]() I personally strongly dislike flatscreen sets. Non-Gaussian image elements don't look right to me (a certain softness and cross fade from picture element to picture element makes an image look better), I don't like (makes my eyes tired) the flashing nature of image refresh in a flat screen (versus the soft fade of a CRT), and don't get me started on viewing angle limitations of flat screens and all the maladies digital video has built in to it. If I ever go HD I'm getting an HD CRT set.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#12
|
||||
|
||||
|
Quote:
Good luck with your future HD CRT.
__________________
|
|
#13
|
||||
|
||||
|
Quote:
Plasma TVs and micromirror devices get their gray scale by duty cycle modulation, which can cause some artifacts when there is motion present or when the eyeball scans across the image quickly. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|