Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-08-2015, 05:20 PM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
the weird thing here is i originally had a full screen and the verticle did work but only if the hold pot was maxed at one end and gradually it got worse until i laid it up waiting for caps and all of this started after turning it on. when all it was was it seemed that the hold pot was out of range then i had to replace the rest of the disc caps and a few micas. the caps were 1kv disc caps 1kv micas and the others are 1kv also. i had also changed the vert centering thinking this may be harming something but no good maybe i reversed the 2 caps there for the pic to be up side down. ok ill go over a few things here including the caps and resistors you mention as well as go over what i did around the v o tube. i would hate to think that one of the 5, 6kv caps may be bad if this would cause this i dont know. all this started befor i put any of these caps in but i put them in anyway thinking there were a few bad but it never helped.

Last edited by timmy; 04-08-2015 at 05:24 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:43 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.