![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
The cap you mentioned in a CTC12 (and earlier chassis) is bypass on the 6AW8/6LF8 screen grid and causes weak sync in borderline cases
__________________
"When resistors increase in value, they're worthless" -Dave G |
|
#2
|
|||
|
|||
|
ah, I see.
I have been chasing an issue where some brightness like a title in white causes a drop in overall screen brightness. Some how I got Zeno response tied up with that. |
|
#3
|
||||
|
||||
|
I THINK what people are refering to is what is known as the "200 volt cap". It is in the bias supply to the CRT cathodes. Nearly always--it is a flyback-derived supply--on solid state sets. Even BW sets have this cap--including the 1M30T20--it is called the 120 volt supply--and derived from the flyabck.
It will be from a 2.2 UF to a possible 33UF, Usually 250 volts or more--but some late 70's to 90's sets tied that cap to the B+ supply --so it only sees the increase from the flyback on it. Occasionally--this cap is on the CRT board--but usually on the chassis, and often near the flyback. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|