![]() |
|
|
|
#1
|
||||
|
||||
|
Well I've got the focus problem figured out. The focus coil needs to be adjusted beyond what the mount will allow. I guess the 10FP4 and it's straight gun is just different enough that it needs a different angle on the focus coil. I'll modify the mounting holes so I can position the coil where it needs to be with the 10FP4. I'll have to hold off until the chassis is back in the cabinet as the CRT will be in a different position than my temporary out of cabinet support.
Now to tackle the next problem, the ghosting. Does anyone have any thoughts on what could be causing it? *Edit I haven't yet tried the tubes in the IF and video sections yet so I'm going to start there and see if that is the culprit of the ghosting.
__________________
John Last edited by vts1134; 04-06-2015 at 01:20 PM. |
|
#2
|
||||
|
||||
|
It is the IF alignment.
|
|
#3
|
||||
|
||||
|
You can test whether the alignment or the video amplifier is responsible for thr ghosting. Simply rotate the fine tuning control and if the ghosting changes, then it is the IF amplifier. In the nearly 70 years since the set was manufactured, the alignment will change. Especially, when in the past, a phantom tweeter likely intervened.
|
|
#4
|
||||
|
||||
|
__________________
John |
|
#5
|
||||
|
||||
|
The "phantom tweeker": a past individual who had a passion for adjusting things which did not require adjusting. On the other hand it could be a bad tube or the coil adjustment drifted as it aged. Obviously my auto correct did not know what a "tweeker" was.
Nevertheless you should make the fine tuning test for the ghosts. Last edited by Penthode; 04-07-2015 at 07:28 PM. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
I'm glad I don't have auto correct sometimes....Someone on AK has the rather humorous signature line "Dear auto correct, I'm sick and tired of all your Shirt."
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#7
|
|||
|
|||
|
Before doing alignment, I would try subbing the IF tubes, beginning with the last one. But watch out for tweeters though.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|