|
there is a blanker circuit out there and was wondering if there is one for this motorola or maybe this one would work to get rid of those lines when the brightness is turned up. the circuit i saw was for an admiral set with a 7jp4 crt. its got a 250pf 1 kv cap and a 220k resistor in series from pin 5 of the 6sl7 to pin 3 of the crt. the crt pin 3 goes to ground and this wire should be cut off ground and attached to these 2 components to pin 5 of 6sl7. does this sound right for the motorola ts18 chassis. this setup is said to eliminate those lines with the bright up.
|
04-04-2015, 06:45 PM
Threaded Mode