Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-27-2015, 03:24 PM
Winky Dink's Avatar
Winky Dink Winky Dink is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Meridian, Idaho.
Posts: 583
Trying to deal with multiple suggestions.

As you can see, the original deflection circuit was a non-player.



Fortunately, before I changed any moveable part connected to the CRT I indexed the position on the chassis or on the CRT and took many photos. In the original configuration it was working properly (I was watching the set in 1969 when the picture went away) and it hadn’t been touched since.

These are photos from 5 years ago.
The CRT “works:”



There is high voltage:



I’ll have to look into fabricating a high voltage probe.

I would like to run the CRT test with the Beltron. I have no other CRT to play with at this time. The Beltron is putting out 15 filament volts with no load. I think that, if I hook up the CRT, the worst thing that can happen is failure of the voltage rheostat which would put 15 volts across the 6.3V tube. Is 15 filament volts likely to damage the CRT? If not, then I’ll try the test and then start reassembling the set.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:24 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.