![]() |
|
#21
|
||||
|
||||
|
Bingo - one open coil on the yoke. I pulled it and saw the copper oxide green nuggets at various spots on only one of the windings. Even where the windings are fabric-taped, have the green death. I did poke around the nuggets with a sharp chopstick and got the winding to read 14 ohms, across pins 4+6, and the "good winding" reads 4 ohms.
Im going to power it up and look for sparks in the windings with yoke face up on the bench, in the dark, CRT and HV anode disconnected of course. Stand by for sparks...
__________________
"When resistors increase in value, they're worthless" -Dave G Last edited by DavGoodlin; 03-24-2015 at 07:49 PM. |
| Thread Tools | |
| Display Modes | |
|
|