|
|
|
#25
03-14-2015, 11:20 PM
|
||||
|
||||
|
Your remote appears to be the same as used on my Grenoble CTC 7. The original battery and plug were intact and it was connected to the 9 volt tap. I swapped connectors for a standard 9 volt battery and it works fine. The only problem I had was two of the 5 K ohm relays on the remote chassis that were open. I was able to find modern relays and after adjusting contact clearance and using lighter springs it works great.
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode