Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 03-13-2015, 07:32 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by Olorin67 View Post
Horizontal line means loss of vertical deflection and vise versa.
The "vice versa" condition (vertical line) cannot occur in modern TV deflection systems. The only way a vertical line could ever appear on the screen would be in a very old TV (pre-war to about 1950), if the set used an RF high-voltage system; the flyback HV system, used in all TV sets from the '50s on, is set up so that if the horizontal sweep fails for any reason, the high voltage to the CRT 2nd anode goes with it.

You are correct, however, as to the vertical sweep. Failure of the tube or of any of the components in the vertical sweep stages will stop the vertical deflection, resulting in a horizontal white line across the width of the CRT screen. Turn the brightness all the way down to prevent burning the phosphors.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.