Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-04-2015, 08:29 PM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by Electronic M View Post
Have you tested all the tubes in the color section? If not I recommend doing so. My set had no color, then I tested the tubes in the color section, and found most were testing bad to very weak. After replacing all the color tubes that did not test decently the color section came back STRONG.
I did test the tubes a long time ago on my Hickok 6000A. I think I will do it again on my new B & K Precision 747. Oddly, I get color when the set wants to and when I do it is beautiful. It always seems to happen when I use a DVD/VCR combo and run the line E up a bit. Coincidence perhaps.

Old_coot88 mentioned the color killer adjustment. I am guite familiar with that adjustment. Worked with it last night and got the snow and color fringing. I backed off till that went away, and then a little more as some fringing was still there. The idea which follows common procedure is to shoot for the perfect black and white picture which I can achieve pretty much. Once I get the color actually working regularly I will go through the whole purity and convergence procedures using my vintage RCA dot bar generator.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote
  #2  
Old 03-04-2015, 10:15 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
While chasing the intermittent-color problem, leave the color killer adjustment full 'on', all the way to the stop, while troubleshooting.

In fact, you could leave it full 'on' these days, since everything is broadcast in color. Whereas in the old days when some broadcasting was still in B&W, the color killer circuit served to turn off the chroma to prevent color artifacts in the BW image.
It works by sensing the presence or absence of the burst signal.
Today, that function is moot unless something is being transmitted in actual (burstless) BW.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.