![]() |
|
|
Thread Tools | Display Modes |
|
#6
|
||||
|
||||
|
Using that connector is a neat idea for sets with the super-skinny plugs of the 50s and 60s.
Most sets that were series-wired AND did not have polarized plugs, had some measures to prevent contact to chassis via metal control shafts, exposed fasthener heads, etc. Metal-shaft pots were mounted on insulated pieces, nylon fastener inserts hold a hot chassis to metal cabinets without making contact, etc. Fishpaper-cardboard to prevent chassis contact via vent slots... I hate the older molded, non-polarized extension cords, they never make proper and full contact with plug blades. I have a few that were overheated when space heaters were plugged into them, kept in my show-n-tell box of goodies. ![]() Lots of bad wiring devices were made in the 1960's
__________________
"When resistors increase in value, they're worthless" -Dave G |
| Thread Tools | |
| Display Modes | |
|
|