Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 03-02-2015, 10:25 PM
legenbass77 legenbass77 is offline
VideoKarma Member
 
Join Date: Jan 2011
Posts: 44
Thanks for the replies! I just noticed my typo in the title it is 74BR-1501B, not 1510B, sorry for the confusion. I must have been thinking of my Lowrance LRG-1510B depth finder. Good to know about the .15mfd, just never seen one like it before. I don't have the 2 mfd soldered in, I just clipped it in to see if it made any difference before I soldered the .1 mfd in place. I checked the coils labeled 33, and 34 on the schematic and they had continuity, but will check them again just to make sure I didn't miss a section, schematic calls for around 40 ohms on the primary, and secondary windings. I will take a break from this project for a few days, and then recheck my work again. I did perform a short test on each 50L6, and they showed no heater to cathode shorts, or any other shorts. One is at the high end of the bad range on emission, and the other is on the low range of good, and I have that one installed. I'll test, and try another to be sure.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.