Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 03-01-2015, 04:40 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by Username1 View Post
And if DXing is what you want, then a spectrum analyzer is the way to go, I have one,
and when I was getting nothing here, I used it to point my antenna, and find the channels
I was going after....
If you are interested only in detecting the DX transmitter rather than trying to watch a program that is a good way to go! I use a slightly different approach, an Icom 8500 communications receiver that I can tune to VHF or UHF frequencies. I put the receiver in "cw" mode and look for the DTV "reference carrier" approx 0.310* mHz above the lower edge of the assigned channel frequency.
Example... ch 12 is assigned 204 to 210 mHz... I hear a nice tone at 204.310 mHz. Using this method, I can find stations that are not showing any signal strength on my DX-friendly Zenith box.

jr

* 0.309440559 mHz
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.