Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-27-2015, 08:27 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Jeffhs View Post
Someone must have goofed on that IF frequency. Shouldn't it be 455 kHz? Also, if this radio has push-pull audio output, shouldn't the tubes be identical, e. g. two 50C5s?

BTW, one of the knobs is mismatched; I don't know which one is still original. Someone must have lost one or the other and replaced it with one from the junk box.
There's nothing in the rules, that say the IF frequency, has to be 455KC. I'm actually surprised that the IF is 262KC. I guess they used it to minimize images, the same way, they used 262KC in most car radios.
I still maintain, that the radio is highly engineered, to provide performance that exceeds the competitive makes.
Regarding the output stage, it is not push-pull, but designed to run on AC, as well as battery power, so that's the reason for the novel audio output stage. Zenith could have used that idea on their TO's, instead of the push-pull 1LB4's, that didn't sound, nearly as good.
One of the knobs, looks like a GE. The original knob, was either lost on broken.
Reply With Quote
  #2  
Old 02-28-2015, 11:50 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by dieseljeep View Post
There's nothing in the rules, that say the IF frequency, has to be 455KC. I'm actually surprised that the IF is 262KC. I guess they used it to minimize images, the same way, they used 262KC in most car radios.
...
TV sets back in the early post war days used an IF around 22MHz, then later 45MHz. But that was after channel 1 was deleted (channel 1 would have been in the middle of the 45MHz IF bandwidth).

Some prewar 45MHz band FM radios used an IF around 8MHz.

I think the FCC avoids assigning powerful transmitters on the popular IF frequencies. 455KHz, 10.7MHz, 45MHz and so on.
__________________
Reply With Quote
  #3  
Old 03-01-2015, 12:17 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by wa2ise View Post
TV sets back in the early post war days used an IF around 22MHz, then later 45MHz. But that was after channel 1 was deleted (channel 1 would have been in the middle of the 45MHz IF bandwidth).

Some prewar 45MHz band FM radios used an IF around 8MHz.

I think the FCC avoids assigning powerful transmitters on the popular IF frequencies. 455KHz, 10.7MHz, 45MHz and so on.
It seems, most of the pre-war FM sets used an IF of 5.25MHZ.
Some makes of TV sets, still used 21MHZ IF's, till the mid 50's.
Admiral was unique in that respect, the VHF only models, were 21MHZ, where the UHF/VHF models were 41MHZ. IIRC, they did that till the late 50's, or so.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:33 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.