Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 02-26-2015, 09:15 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
The horiz output tube makes the grid go negative. Very limited operation with the cap off the horizontal output can show some negative if the horizontal oscillator is running. It is best to scope the grid of the horizontal if you can. Check the horizontal phasing (AFC) diodes for leakage. Once in a blue moon I have had them catch me.
On that set, also check your horizontal hold control for opens or leakage. Also, check continuity of the horizontal oscillator coil. A snapped wire will stop the oscillator
Plate resistors of the horizontal driver tube also.

Last edited by Zenith26kc20; 02-26-2015 at 09:19 AM. Reason: wrong instruction, too early, no coffee
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.