Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2015, 08:34 AM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
m5 is the ballast tube, does anyone know how many resistors are in this metal tube and what the values are because the schematic shows m5 at the line in as 37 ohms, or how to test to see if its good. the amount for an original ballast is just nuts at 85.00 i would rather use ceramic resistors to make this up if i had to.
Reply With Quote
  #2  
Old 02-24-2015, 10:14 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by timmy View Post
m5 is the ballast tube, does anyone know how many resistors are in this metal tube and what the values are because the schematic shows m5 at the line in as 37 ohms, or how to test to see if its good. the amount for an original ballast is just nuts at 85.00 i would rather use ceramic resistors to make this up if i had to.
Capacitance voltage drop is the way to go! I know it isn't authentic, but neither is a cluster of high wattage resistors. Plus, there is a cushioning effect on the inrush current.
The original ballast tube had some kind of an iron alloy wire, that would rust through. That's the reason, the new ballasts are glass, that are filled with, what I understand is nitrogen gas.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:10 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.