Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #27  
Old 02-20-2015, 08:22 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Electronic M View Post
If the getthers are still normal, then perhaps it is just a bad heater weld. I'd consider getting something like a charged 80uF 200V cap connecting it to the heater pins and tapping on the neck with a screw driver....You have nothing to loose in it's current state.
When I first checked it with a reduced heater voltage, the neck got a little warm to the touch, but I couldn't see any glow.
I'll try the charged cap trick, as the Crt is probably scrap.
When I first received the tube, it had a lot of gray plastic tape wrapped around the front of the tube, but not covering the bond between the CRT front and the safety glass. It was appearant the the tube needed cataract surgery. I didn't care about that, as long as it showed a good picture.
A little history about this set. I bought it from Doug, drh**** on Ebay.
The set is a low hours set, that is extremely nice and appears to not ever being repaired. All original tubes, clean inside and out. That was the famous CRT that almost cost him his life. It imploded, when he was attempting cataract surgery.
I bought a conversion kit on ebay for a 25XP22 and half the parts were missing. I guess some things aren't meant to be.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:00 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.