Quote:
Originally Posted by Username1
I wonder if after that tv is fixed, running it at just above minimum bearable brightness
and possibly adding a 2 to 3 ohm 10 watt resistor in series with the picture tube
filaments - reducing the voltage 2 to 3 volts may just add several years to the
life of a 23EGP22.......?
It sure looks like a nice bright tube now....
.
|
The CRT was designed to operate on 6.3 volts. I don't think, running it on a lower heater voltage, would extend the life of the CRT.
That CRT, like the mid-90's Zenith CRT's were just a bad situation. It was all, the luck of the draw.
In the mid-60's, when rectangular CRT's got popular, there was common failures in the other manufactures CRT's. I saw bad CRT's in Zenith's, RCA's and Sylvania's, where the sets were only 14 to 18 months old.
Guess what, the set owner, had to pick up the tab for a CRT replacement.
A little later on, most manufacturer's increased the warrantee to two or three years.