Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-19-2015, 05:08 PM
rca2000's Avatar
rca2000 rca2000 is offline
VideoKarma Member
 
Join Date: Mar 2003
Location: cincinnati,ohio
Posts: 2,090
Do you all feel the same way about ALL of the indirectly heated rectifier tubes--like 6AX5, 6CA4, 6X4 , 5AZ4 ?
Reply With Quote
  #2  
Old 02-19-2015, 05:33 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by rca2000 View Post
Do you all feel the same way about ALL of the indirectly heated rectifier tubes--like 6AX5, 6CA4, 6X4 , 5AZ4 ?
No. Those later designs were greatly improved and MUCH less prone to the type of failures the 6X5 was infamous for (they learned from their mistakes). Heck if only it would not look like a complete hack job the 6X4 or 6CA4 would probably be decent replacements (with proper socket adaptation) for the 6X5.

Some of the LAST 6X5s supposedly were 6X4s or 6CA4s in an octal envelope, and were as safe as the rest of the later types, but if someone like me who has been doing this for over a decade has a hard time telling the difference, then advising a novice to do so would be a bad move... I don't want to give him advice that could lead to an expensive component (the power transformer) being ruined.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Last edited by Electronic M; 02-19-2015 at 05:42 PM.
Reply With Quote
  #3  
Old 02-19-2015, 09:39 PM
rca2000's Avatar
rca2000 rca2000 is offline
VideoKarma Member
 
Join Date: Mar 2003
Location: cincinnati,ohio
Posts: 2,090
Quote:
Originally Posted by Electronic M View Post
No. Those later designs were greatly improved and MUCH less prone to the type of failures the 6X5 was infamous for (they learned from their mistakes). Heck if only it would not look like a complete hack job the 6X4 or 6CA4 would probably be decent replacements (with proper socket adaptation) for the 6X5.

Some of the LAST 6X5s supposedly were 6X4s or 6CA4s in an octal envelope, and were as safe as the rest of the later types, but if someone like me who has been doing this for over a decade has a hard time telling the difference, then advising a novice to do so would be a bad move... I don't want to give him advice that could lead to an expensive component (the power transformer) being ruined.

THAT is why I told him to put FUSES in the chassis. I did so on my slivertone stereo chassis I recently acquired. a 1.25A. SB on the primary. I feel a 1A SB would work well on that radio chassis in the primary .


I DID have that exact chassis and maybe the speaker--it was GIVEN to me many years back. Think it was STOLEN a couple of years ago in the garage robbery though...
Reply With Quote
  #4  
Old 02-19-2015, 10:46 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by rca2000 View Post
THAT is why I told him to put FUSES in the chassis. I did so on my slivertone stereo chassis I recently acquired. a 1.25A. SB on the primary. I feel a 1A SB would work well on that radio chassis in the primary .


I DID have that exact chassis and maybe the speaker--it was GIVEN to me many years back. Think it was STOLEN a couple of years ago in the garage robbery though...
Fuses are fine and dandy, but when you take a NEW 6X5 that tests good and use it to replace a shorted one only to have the NEW GOOD one SHORT in a brilliant LIGHT SHOW the MOMENT it warms up you kind of loose confidence in all tubes of that type. There is a reason Zenith power transformers of that era are harder to find than those of other makes, and I think you can guess it.

You could possibly run that with all the original caps as a daily driver too with just a fuse, but would you REALLY want to do that?
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #5  
Old 02-19-2015, 11:51 PM
rca2000's Avatar
rca2000 rca2000 is offline
VideoKarma Member
 
Join Date: Mar 2003
Location: cincinnati,ohio
Posts: 2,090
Quote:
Originally Posted by Electronic M View Post
Fuses are fine and dandy, but when you take a NEW 6X5 that tests good and use it to replace a shorted one only to have the NEW GOOD one SHORT in a brilliant LIGHT SHOW the MOMENT it warms up you kind of loose confidence in all tubes of that type. There is a reason Zenith power transformers of that era are harder to find than those of other makes, and I think you can guess it.

You could possibly run that with all the original caps as a daily driver too with just a fuse, but would you REALLY want to do that?


I meant to fuse it..>AFTER it it repaired. Duh !!! INCLUDING the wires--Zeniths of that era are known for VERY brittle insulation on chassis wiring.
Reply With Quote
Audiokarma
  #6  
Old 02-20-2015, 10:03 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by rca2000 View Post
I meant to fuse it..>AFTER it it repaired. Duh !!! INCLUDING the wires--Zeniths of that era are known for VERY brittle insulation on chassis wiring.
I used, either the latest issue 6X5GT or the later JAN 6X5WGT. I'd like to see that baby short.
I'm rather against using silicon rectifiers in old equipment, unless it was original design. They're a little hard on the electrolytics because they get full or excessive voltage, instantly. You should replace the 'lytics with higher working voltage, than the originals.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.