Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 02-12-2015, 08:10 AM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
hmmmm.... I have a Sanyo DS25390, I got it from my sister who bought it new....
She sent it to me for a buzzing sound it would make while on.... Turned out to be a
common problem with a bad cap on the standby supply that would run the relay
when the set is on.... Yesterday while watching the set I saw the picture fold up from
the bottom for a few seconds, then for the rest of the evening it returned to full size.
But you could see very tight compressed scan lines at the bottom..... I guess it's a cap
since the buzz was a cap, and I found many of this type of problem on the internet...
I imagine most Sanyo's are the same, and that if this cap goes bad completely it
will take out several other components....? Correct...? I guess I'm better off taking
this set out of service and replacing caps in the vertical...... When I got the set, it also
had the white glue on the convergence magnets dried and let go, I did a full convergence
on this tv, It has an outstanding picture, So I'm very interested in keeping it....
I have several back-ups....

.
__________________
Yes you can call me "Squirrel boy"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:38 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.