65 maggie

[Username1]

A 330K should not test 740K that is way out of range.....
At worst 20% toll. 330K X .2 (+ -) 66K = 393k to 264K would be
an acceptable range if it's a 20% resistor..... 4th band = toll.
no band =20% silver = 10% gold = 5%. yours is 200%+ off.....

Timmy, Don't mess with the filaments on the picture tube... Parallel filaments you will
not weld back because the current is always being drawn off by the other working
ones, over power the working ones and soon you'll have a completely dead tube....

The arcing you see is most likely something down the tube, mostly because that one
gun has no electron flow.... you're gunna have to let it alone till some good idea comes
along...

.