Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2015, 02:10 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
OK this is from the G line manual.
It calls for a 95-3172-01 so may be different.

primary grey & grey brown 3.3 ohm
sec #1 black & black green 8.8 ohm for DGS
sec #2 blue & yellow filament 6.3 V 840ma
sec #3 white & black yellow 3.5mfd cap only
red yellow tap to ground
red black 135V
green 35V
green 35V
brown 6V
red 135V

73 Zeno
Reply With Quote
  #2  
Old 02-01-2015, 12:46 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by zeno View Post
OK this is from the G line manual.
It calls for a 95-3172-01 so may be different.

primary grey & grey brown 3.3 ohm
sec #1 black & black green 8.8 ohm for DGS
sec #2 blue & yellow filament 6.3 V 840ma
sec #3 white & black yellow 3.5mfd cap only
red yellow tap to ground
red black 135V
green 35V
green 35V
brown 6V
red 135V

73 Zeno
My Zenith tranny listing shows the -01 to have UL mods, probably the beefier insulation when they changed the UL requirements in 77/78. Zenith microfiche also shows the -01 mod to be the only orderable part - the orig tranny is subbed by the -01. Also, some trannys had the suffix rubber stamped in silver or gray paint after the stamped-in-steel part number.

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
  #3  
Old 02-03-2015, 01:11 AM
EdKozk2 EdKozk2 is offline
Tinker
 
Join Date: Mar 2014
Location: Elkhorn, WI
Posts: 542
Thanks you to everyone who helped me identify the leads of the Zenith
95-3172 transformer. Those resistance readings, made all the difference.
I tested the transformer without an oil cap and the HV 135v lead only read
100-103vac. When connected the oil cap the transformer voltages came
right up specs.
Ed
Attached Images
File Type: jpg MVC-683S.JPG (36.1 KB, 14 views)
File Type: jpg MVC-686S.JPG (35.3 KB, 10 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:08 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.