Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 01-31-2015, 12:35 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by earlyfilm View Post
The .47MFD should be added across the meter leads to prevent the meter from loading the tube and giving a false reading. Any DC current meter adds some AC load to circut, and the added capacitor helps smooth it out.

Until you do this, you don't have an accurate measure of cathode current.

Usually this added load lowers the cathode current, but there are a very few exceptions.

James
Actually, the cap nulls any added inductance (meter coil) and is necessary to prevent ringing which will destroy the HOT or other horizontal sweep components. Jack Darr commented on it, and Margolis' book details it better.

http://www.americanradiohistory.com/...-Page-0061.pdf

The meter's internal resistance acts like a larger value cathode resistor and has some limiting action, but the added inductance can bring about ringing that the tube and sweep components cant handle, so you bypass it with the cap.

I just bypass the milliammeter altogether, and add a 1 ohm resistor (not a wirewound!) in the cathode of the HOT. Using the unity law, the measured voltage across the resistor = cathode current. An analog high-impedance meter works best (I use a WV-98C VTVM) so you can see the peaks and valleys while adjusting the efficiency coil. The Pomona 2712A test socket I have for the 6JS6s has a little booklet suggesting this.

I'm tempted to install a cheapo meter permanently, just to check cathode current often. RCA 113382 flys are not exactly common these days...

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!

Last edited by Findm-Keepm; 01-31-2015 at 12:44 AM. Reason: cheapo spelling
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:52 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.