Quote:
Originally Posted by Electronic M
You actually want to minimize the HO tube cathode current. To do that you need to adjust the Horizontal Linearity/efficiency coil....I recommend looking up the sam's horizontal adjustment procedure for your set and doing that first. It will prolong the life of the flyback.
|
Ok Thanks, At normal brightness and with programing on, current hovers between 180-220 ma. After an hour and half of play, flyback tire is barely
warm. Acorrding to Sams it says current should be about 280 ma. not to exceed 300 ma with a .47 mfd cap across meter. I'm not sure if my meter has a cap across it or how that would effect the reading. So do you think its ok were its at?