Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 01-28-2015, 05:08 AM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by John Marinello View Post
Has this set been restored? If not, then you should be thinking full restoration, and not of repairing the set. If you insist on operating the set as-is, keep close
tabs on the four filter cans. If any start getting hot, you had better shut it down in a hurry. Also, there is a picture control switch in the pencil box. You
need to have it in full circle mode before you can make height + linearity adjustments. Looks more like the AGC is set too high. Do you need a channel knob for it?
Someone prior to me owning it recapped all the paper caps, and only 2 single ecaps. I just recapped the remaining 4 cans, checked a few mica's, replaced a out of spec bumblebee cap on the width control, and found and replaced a bunch of out of spec resistors in the horz and vertical section.
Yes I have it set to full circle. I have the knobs for it in storage, just did not find them yet.
Also all the tubes checked out ok.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.