Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-08-2015, 01:07 PM
bonanzaman's Avatar
bonanzaman bonanzaman is offline
VideoKarma Member
 
Join Date: Dec 2013
Location: Westcliffe, Colorado 8,oooft msl
Posts: 77
Well, I finally got a chance to open up the set, to check connectors, etc.
Right away I see a BIG problem. The guy that gave me the set must have installed the base with WAY to long screws, and 2 of the ribbon leads have been pierced through with them!

https://www.dropbox.com/s/iepmzp6pta...80150.JPG?dl=0

https://www.dropbox.com/s/mbg1gerbci...80151.JPG?dl=0

My next question is, how (which direction) are these ribbon connectors plugged in? I don't want to damage the board connections....are those small locks on the ends for the connectors, or do they just pull off?

Thanks for the help!
Mark
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.