Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #27  
Old 01-07-2015, 07:34 PM
Doug66 Doug66 is offline
VideoKarma Member
 
Join Date: Sep 2014
Posts: 166
Not too much luck today with it. After the corona dope cured, I reinserted the width sleeve and it immediately started arching. I had used the lighter amber corona dope to coat the yoke windings, but I have not used the thicker orange stuff, and it's curing now.

I also discovered something else. I was watching bandersen's series on Zenith bug eye sets last night. In that series, he encounters width sleeves for the 1st time. He describes them and mentions the spring clip that holds them in place with a ground wire. I hadn't don't that, so I went back out to the parts chasses where I got that width sleeve out of a yoke, and sure enough, there was that grounding clip. However installing it made no difference. Still arching.

Continuing to watch his series on the Zenith sets, I noticed his yoke had a cardboard sleeve insulating the yoke windings. So is the correct set up: yoke, cardboard sleeve, then width sleeve inside the cardboard b ut still against the tube neck, or should the width sleeve be directly in contact with the woke windings?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.