![]() |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Somewhere buried in one of the sites dedicated to early color is one of the best descriptions of the synchroguide circuit I've seen.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#2
|
||||
|
||||
|
Quote:
at scads of those, all the URLs now forgotten. That and lots of testing with a scope never found the problem, the circuit is too complicated and feedback-y. Nor did doing simulations. The problem was solved by replacing ALL the resistors in or directly adjacent to that circuit. One was bad at high temps and/or voltages. Testing all the old ones with an ohmmeter and heat gun didn't find a bad one. The caps had already long been replaced, along with two resistors (replaced again). |
|
#3
|
||||
|
||||
|
I have a pretty good explanation of the synchroguide in one of my manuals, I'll scan it when I get home so we can discuss.
__________________
Evolution... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|