Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-24-2014, 07:56 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by maxhifi View Post
I keep looking at this thread, and can't keep my mouth shut any longer

1. Beautiful job on the cabinet

2. Awesome metal work

3. Why did you use a hot chassis? This thing could kill someone, and an isolation transformer capable of powering it is cheap, i.e. $20 at digikey or mouser. It would also prevent ground loop/hum issues during use, and make it a more useful test instrument.
It's kind of hard to tell if the chassis is the B-. It looks like the negative on the electrolytic is connected to a B- line of the terminal strip.
It's easy enough to use an isolated B- line, bypassed to the chassis by a .1 mfd cap to the chassis. Maybe, that's what was done.
As a retired electrician, I can't stress enough that your work bench has a GFCI receptacle.
I make portable GFCI's, by using a plastic single device box, a three wire power cord and a GFCI receptacle.
Even if your place, doesn't have grounding receptacles, using an adaptor will give you the same protection, using the portable GFCI.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.