Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2014, 01:59 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Back in '97, I received a phone call from the head of maintenance at the local Motel 6. He said they were in the process of getting new TV's and that he had 20 19" GE's. He said that most of them worked; but, not that great. He went on to say that the manager told him to get rid of them. He sold them to me for $5/each and they were all "PC" chassis sets with the standard two-knob mechanical tuner. I fixed 19 out of the 20 and sold them for anywhere between $40-$75/each. A lot of them had weak CRT's; but, most of them rejuvenated well. Most of the other problems were caused by the usual bad capacitors in the vertical and power supply circuits. A few months later, he called me to say that he had more TV's available; but, the place was under new ownership and they had different ideas on the pricing. He said they were thinking $50/each and I declined.

One you want to stay away from is the 25" Panasonic-built GE's. Every one of those that I saw had a weak CRT, bad flyback, and/or numerous bad connections on the chassis. IIRC, the flyback part number was TLF14423F. Those sets were made around '85-'86, in both table and console models. I never really cared for the picture on them, even when they worked right.

There was also a BC chassis, used in 13" and 17" sets of the '83-'84 time period. This chassis was also made by Panasonic. It had a decent picture; but, flyback transformers loved to go up in smoke in them.

Right before the end, there was an MK chassis 19" set (available in knob tuned versions and digitally tuned remote versions) that was also made by Panasonic. I don't recall seeing too many bad flyback transformers in this one; but, there was an orange HV disc capacitor that connected between the collector of the HOT and ground that would short and burn. The CRT's often didn't last long in these, either. After this chassis, everything pretty much shifted to Thomson and used a CTC-xxx chassis.

Panasonic made good VCR's for GE; but, they should have stayed away from building their TV's.
Reply With Quote
  #2  
Old 12-10-2014, 02:15 PM
Rod Beauvex Rod Beauvex is offline
The lead ear.
 
Join Date: Oct 2005
Posts: 232
Quote:
Originally Posted by radiotvnut View Post
Back in '97, I received a phone call from the head of maintenance at the local Motel 6. He said they were in the process of getting new TV's and that he had 20 19" GE's. He said that most of them worked; but, not that great. He went on to say that the manager told him to get rid of them. He sold them to me for $5/each and they were all "PC" chassis sets with the standard two-knob mechanical tuner. I fixed 19 out of the 20 and sold them for anywhere between $40-$75/each. A lot of them had weak CRT's; but, most of them rejuvenated well. Most of the other problems were caused by the usual bad capacitors in the vertical and power supply circuits. A few months later, he called me to say that he had more TV's available; but, the place was under new ownership and they had different ideas on the pricing. He said they were thinking $50/each and I declined.

One you want to stay away from is the 25" Panasonic-built GE's. Every one of those that I saw had a weak CRT, bad flyback, and/or numerous bad connections on the chassis. IIRC, the flyback part number was TLF14423F. Those sets were made around '85-'86, in both table and console models. I never really cared for the picture on them, even when they worked right.

There was also a BC chassis, used in 13" and 17" sets of the '83-'84 time period. This chassis was also made by Panasonic. It had a decent picture; but, flyback transformers loved to go up in smoke in them.

Right before the end, there was an MK chassis 19" set (available in knob tuned versions and digitally tuned remote versions) that was also made by Panasonic. I don't recall seeing too many bad flyback transformers in this one; but, there was an orange HV disc capacitor that connected between the collector of the HOT and ground that would short and burn. The CRT's often didn't last long in these, either. After this chassis, everything pretty much shifted to Thomson and used a CTC-xxx chassis.

Panasonic made good VCR's for GE; but, they should have stayed away from building their TV's.
I wonder if those were also badged Quasar?
Reply With Quote
  #3  
Old 12-10-2014, 03:59 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by radiotvnut View Post
One you want to stay away from is the 25" Panasonic-built GE's. Every one of those that I saw had a weak CRT, bad flyback, and/or numerous bad connections on the chassis. IIRC, the flyback part number was TLF14423F. Those sets were made around '85-'86, in both table and console models. I never really cared for the picture on them, even when they worked right.

There was also a BC chassis, used in 13" and 17" sets of the '83-'84 time period. This chassis was also made by Panasonic. It had a decent picture; but, flyback transformers loved to go up in smoke in them.
Not that long ago I had one of those infamous Panasonic consoles from 1984. A long time ago we had a 19" Panasonic with a red LED channel readout and six large rectangular buttons underneath, arranged in two columns.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.