Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-04-2014, 03:15 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,495
Was the horizontal output SS? 30V*4A=120W! the average HO Tube is rated for <20W IIRC, so if it was tube I can't imagine how the horizontal stage could supply that...For more than a few seconds.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #2  
Old 12-04-2014, 07:40 PM
Alastair E Alastair E is offline
VideoKarma Member
 
Join Date: Feb 2013
Posts: 79
Quote:
Originally Posted by Electronic M View Post
Was the horizontal output SS? 30V*4A=120W! the average HO Tube is rated for <20W IIRC, so if it was tube I can't imagine how the horizontal stage could supply that...For more than a few seconds.
I know--Mad innit! I don't know Why it worked--but it did! The PL519 (bit like a 6KD6, so 45W Plate diss) was obviously working very hard, perhaps a dim glow from its anode--but it kept running for about 3 months like that before the CRT was just dead at the end--Not surprising really--It had got pretty hot too, the blue-lat magnet had melted somewhat and the glass inside the neck had gone silvered!.....

Also--a Line O/P valve is used as a switch--not in a linear mode, therefore dissipation in the valve is lower than one would expect,--bit like when they are used for RF work--you can push a 6KD6 to produce 200W or more of RF energy, same principle applies--the valve is still within its ratings as its used as a switch, the tuned circuit does the rest.....

--Even so though, its a bit mad when you think of it!
--The daft things we do in our youth--I would Never do anything like that now--That thing really was a fire-hazard thinking back.....

Last edited by Alastair E; 12-04-2014 at 07:53 PM.
Reply With Quote
  #3  
Old 12-04-2014, 08:04 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,495
Quote:
Originally Posted by Alastair E View Post
I know--Mad innit! I don't know Why it worked--but it did! The PL519 (bit like a 6KD6, so 45W Plate diss) was obviously working very hard, perhaps a dim glow from its anode--but it kept running for about 3 months like that before the CRT was just dead at the end--Not surprising really--It had got pretty hot too, the blue-lat magnet had melted somewhat and the glass inside the neck had gone silvered!.....

Also--a Line O/P valve is used as a switch--not in a linear mode, therefore dissipation in the valve is lower than one would expect,--bit like when they are used for RF work--you can push a 6KD6 to produce 200W or more of RF energy, same principle applies--the valve is still within its ratings as its used as a switch, the tuned circuit does the rest.....

--Even so though, its a bit mad when you think of it!
--The daft things we do in our youth--I would Never do anything like that now--That thing really was a fire-hazard thinking back.....
Okay NOW I can believe that story. You can get a lot out of switch mode supplies, and tubes can handle several times their rated current/power dissipation if it is in the form of brief impulses. Still pretty amazing the horizontal stage and CRT did not fail catastrophically.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.