Rca kcs81b

[Gregb]

Thanks Zeno, I will check again. Most resistors have been replaced, only a couple originals remain in that area and all replacements were checked for value when installed and all originals had one end lifted when checked. What I find strange is all of the voltages check fine and all of the scoped results look good as well. I have tried a test crt and different yoke with the same results. I can get about 3/4 of the screen with the high adjustment at the end of range and at that point it sounds like the circuit is working hard to make that height, I can really hear the transformer.

Gregb

Gregb