Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 11-30-2014, 09:24 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
The first guess would be a weak H output tube of couse. There's a 'quick and dirty' way to check it without subbing the tube.
Turn the set off for about 7 seconds, and back on. Does the width take a while to fill back out to where it was, or not? If it does, it's likely the H out tube.

(The '7 seconds off' test can also reveal borderline weak H osc., 3.58 color osc., Vert out, RF amp tubes, etc.)

Your set probbaly uses a 6BK4 HV regulator. In later Zeniths using beam triode (6HS5, 6HV5 etc.) regulator, a gassy regulator can cause loss of width. The only test for these is to sub the tube, even though it tests 'good' on a tester.

Last edited by old_coot88; 11-30-2014 at 09:32 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.