![]() |
|
|
|
#1
|
||||
|
||||
|
Aluminized 19AP4?
For what it is worth, my old GE tube manual shows the following for the 19AP4: 19AP4; clear glass, single magnet ion trap. 19AP4A; gray glass, single magnet ion trap. 19AP4B; gray frosted glass, single magnet ion trap. 19AP4C; gray glass, aluminized, single magnet ion trap. 19AP4D; clear frosted glass, single magnet ion trap. I bet that some were also rebuilt with straight guns, as well. Poor/complicated layout? To me, it really looks like a "factory kludge"... The chassis still has the punch outs for the (5) 25Z6 rectifier tubes used in the 10 inch models plus other unused punch outs. ![]() jr |
|
#2
|
|||
|
|||
|
Quote:
This chassis was used in the slightly newer models, with CRT's from 10" to 19", some with AM-FM radios. The front right corner, looking from the rear, had all kinds of knockouts for the radio IF transformers and tubes. It was cheaper to use the the same tooling, than to make up new. |
|
#3
|
||||
|
||||
|
Quote:
jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|