![]() |
|
#6
|
||||
|
||||
|
Quote:
DONT buy a new one yet, you need the complete ## first anyhows ( 9-160-??). Gather up the following first: 1/4" nutdriver, an apx 1 foot long insulated plastic anything, pencil iron & solder, a large mirror. Pull back, turn on, place mirror so you can see the pix while you are behind the set. Tap around the board with the plastic anything watching for the set to crap out. You can tap around & isolate where the bad connection is this way. If you get it to act up get back to us & will tell you how to pull the board out, there are tricks to it. 73 Zeno
|
| Thread Tools | |
| Display Modes | |
|
|