Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 11-16-2014, 05:20 PM
Tom Albrecht's Avatar
Tom Albrecht Tom Albrecht is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: San Jose, CA
Posts: 683
Since you have very good sound, and this set uses intercarrier sound, it seems like the video IF has to be working on some level, and the video amp. That doesn't leave very many components that could be giving a problem. Check the wiring and components around the video amp stage and the route for the signal from that stage to the CRT cathode. Make sure the coils on L14 and L15 (in SAMS) are not open. Is the brightness control working properly? Does the contrast control have any effect?

Also, have you adjusted the fine tuning oscillator coil slug in the tuner for the channel you are using?

Last edited by Tom Albrecht; 11-16-2014 at 05:29 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:38 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.